Different Quality Control Test In Jute Mills

Jute Quality Test

Jute quality is a must for getting a good price for the finished goods undoubtedly. So, it is important to ensure the quality of the finished goods. Earlier, this quality should be ensured from the beginning of production. Therefore, the quality tests should be started from the jute section to the finishing section In jute mills. In the intermediate process, it is also important to check the quality of the product. When It refers to online quality control. Moreover, the quality section should give proper suggestions regarding the concern about the product quality. Meanwhile, a complete quality product could be gained.

Quality in Jute mill
Quality Test In Different Sections Of Jute Mills

Quality Test in Different Sections of Jute Mills:

It is important to ensure the raw jute quality and finished goods quality before export. Specifically, different jute quality test is performed in jute mills such as physical test, chemical test, biological ingredient test, ecological test, jute composites test, etc. Indeed, well-equipped laboratories and testing equipment are necessary for performing the jute quality test.

Here, I listed most of the quality test which is required to carry out during processing in the different stages of jute mills. They are-

Jute Section:
  • Jute grading
  • Moisture (MR%) in jute
  • Weight of Morah and its roots equality
Batching Section:
  1. Percentage of the emulsion composition
  2. Stability of emulsion
  3. Application percentage of emulsion on jute
  4. Size of pile
  5. Maturity of pile
  6. Temperature of pile
Preparing Section:
  • Dollop weight check
  • Weight of sliver
  • CV% of sliver
  • Moisture in sliver
Spinning Section:
  1. Count of yarn test
  2. Yarn strength
  3. Twist of yarn
  4. Ends down per minutes
  5. Spinning random study
  6. Moisture % in yarn
Winding Section:
  • Size of cop
  • Faults in cop and spool
Beaming Section:
  1. Number of yarn for a specific quality of cloth
  2. Application % of starch
  3. Moisture MR% test

Weaving Section:

  • Fault of cloth
  • Cloth strength
  • Weight of cloth (light or heavy)
  • Measurement of cloth ( length and width)
  • Oil in cloth
  • Moisture MR% in cloth
Finishing Section:
  1. Scale check
  2. Fault in bag
  3. Bag measurement
  4. Sewing number in the bag
  5. Bag weight (light or heavy)
  6. Weight of bale (light or heavy)
  7. Marking check
  8. Bale survey

To sum up, the quality test is done in different sections of jute mills. Above all, it is important to ensure the quality of the finished products for the best price.

So, that’s all about the quality test in jute mills.

1 thought on “Different Quality Control Test In Jute Mills”

Leave a Comment