Process Flow Chart Of Water Treatment Plant (WTP)

Water Treatment Plant (WTP)

Water treatment plant (WTP) is necessary for every wet processing industry. In case of textile wet processing; water is required for dyeing, printing, finishing as well as garment washing. We know water is two types; hard water and soft water. The water which is collected from up of the soil or under the soil it may contains different chemical substances which makes the water hard. That hard water is not suitable for the wet processing. For this reason, it is required to purify the hard water. After purification by the water treatment plant, water becomes ready for the next wet process.

Water Treatment Plant
Process Flow Chart Of Water Treatment Plant (WTP)

Process Flow Chart of Water Treatment Plant (WTP)

The flow chart for water treatment plant is given below. They are-

Hard Water Store Tank

Stone Filter

Carbon Filter

Resin Filter

Soft Water Store Tank

Delivery Pump

Water Softening

There is an ion exchange method by which hardness of water is removed. After removing the hardness, water becomes soft and following parameters are maintained for considering a soft water. Here, I have present the standard for soft water.

Standard Water Quality for Dye House

The following are the standard water quality for dye house. They are-

Parameter

Permissible concentration

Color

Color less

Smell

No bad smell

Water Hardness

<5 ppm

PH value

7-8 (Neutral)

Dissolve solid

< 1 ppm

Inorganic salt

< 500 ppm

Iron(Fe)

< 0.1 ppm

Manganese(Mn)

< 0.01 ppm

Copper (Cu)

<0.005 ppm

Nitrate(NO3)

< 50 ppm

Nitrate(NO2)

< 5 ppm

So, before processing, a textile engineer should ensure the quality of soft water.

9 thoughts on “Process Flow Chart Of Water Treatment Plant (WTP)”

  1. why fresh & recovery caustice set point 38°&48°.supouse set point below 30°&40°so whats the effect of fabric & caustic gpl

    Reply
  2. Subject: Water Purification Set

    Dear sir/Madam,
    We have an urgent inquiry for above item. If you able to supply us than reply by return mail. So that I will send to you the specification.

    Thanks & Regards,

    KH. MD. TAIB
    (Chief Advisor)
    Mahi International
    Mobile: +88-01715016135
    Phone: +88-02-58153548
    Fax: +88-02-8125652
    E-mail: mahi.international.bd@gmail.com

    Reply
  3. Choice of water treatment technology is important to get end product suiting your specific industry demands
    We as water consultants advise on such issues after understanding the process involved in your industry
    Our organization works both as a WATER CONSULTANT and PLANT MANUFACTURERS
    as per company requirements .
    Cost of Advisory role is fixed while plant erection cost depends on multiple factors

    Reply
    • We are looking for WTP without Resin and Back wash Sand filteration.
      If you have some other process of making soft water from Hard water pls let me know. Present Capacity: 340 M3/Hr.
      Thanks

      Reply
  4. We use sodium cloride for iron removal and sodium thoi sulphate for remove clorine.We have sand filter,train filter and carbon filter.4 times back awash in a day.But hardness will high. (20 to 30 ppm).so dyed fabric uneven.How can we reduce hardness in wtp

    Reply

Leave a Reply to etexofab Cancel reply

*