Exploring the Functions Of Fabric Dryer

Knit Fabric Dryer

The dryer is the third step of the finishing process of knit fabric. After passing the hydro-extractor and de-watering machine, the knit fabrics enter into the dryer. It is important to know about the efficiency of the dryer and production capacity. I have written about the dyed yarn drying process in one of my blogs.

Functions of Dryer

Various types of functions are achieved by the dryer. The following functions are the most common. They are-

  • Firstly, dryer use to dry the fabric.
  • Secondly, to control the overfeed system.
  • Thirdly, to control the vibration which increase the G.S.M.
  • Dryer also use to control the shrinkage% of the fabric.
  • After that, to control the GSM of the fabric.
  • Moreover, it use to match the shade of the fabric.
  • Lastly, to adjust the tone of the fabric.

Textile Dryer Machine

Various types of dryers are used to dry the knit fabric. I have presented two dryer profiles for getting a general idea about the fabric dryer.

Machine NameDryer
BrandRuckh
OriginGermany
Speed4-30 m /min
Temperature range100-1800 C
No of chamber3
No of blower6
Production capacity applied forOpen and tube fabric
No of rotamatic burner2

Another dryer,

Machine Name Dryer
Brand Dilmenler
OriginTurkey
Speed range4-30 m/min
Temperature110-2200 C
Used utilitiesElectricity, Gas , Compressed air
No of motor8
Capacity8 ton per day
Chamber3
Applied forOpen and tube
No of rotamatic burner3

Quality Test After Drying Process

During drying of the fabric, various types of quality tests are carried out to be confirmed the requirements of the delivery products. The dried knit sample is stored for future proof. The following parameters are checked in the drying section.

Shade Check

After drying the fabric, the dried sample shade is checked with customer approved swatch. If any deviation is found then the operator informs his shift officer, who takes the necessary steps to overcome the problem. In the dryer, the shade of the fabric is adjusted by changing the machine parameter depending on the shade type. Experienced personnel is required for doing this shade checking.

Width Check

The width of the fabric adjusts in the drying process. The operator measures fabric width by using a measuring tape and compare with the required width.

Weight Check

The weight of the fabric is checked by cutting the fabric with a GSM cutter and weighted it by electronic balance. After taking the weight of the fabric, it compares with the standard weight.

Fabric Faults

Various types of knitting and dyeing faults are checked after drying.

So, the dryer plays an important role in the finishing section.

1 thought on “Exploring the Functions Of Fabric Dryer”

  1. Fabric Circular Sample Cutter / Gsm Cutter, The circular sample cutter cuts fabric sample in various dimensions, such as 100cm2 for GSM, Dia. 140mm for Martindale test, etc.

    Reply

Leave a Comment

*