Silk Fiber || Physical And Chemical Properties Of Silk

Silk is an animal fiber and it is also called protein fiber. Silk is only natural fiber which is found in filament form. Silk is produced by insects. Fibroin is the main chemical components of silk.

Like all the textile fibers, silk has its own physical and chemical properties which are required to know for better processing in spinning, weaving, knitting, dyeing, printing as well as finishing. Here, I have written about physical and chemical properties of silk fiber.

Physical Properties of Silk: There have a lot of physical properties of silk. Followings are the physical properties of silk:

  1. Color: The color of silk fiber could be yellow, brown, green or grey.
  2. Tensile Strength: Cotton is a strong fiber. It has a tenacity of 3.5 – 5 gm/den. The strength is greatly affected by moisture; the wet strength of silk is 75 – 85%, which is higher than dry strength.
  3. Elongation at break: 20 -25% at break.
  4. Elastic Recovery: Not so good.
  5. Specific Gravity: Specific gravity is 1.25 to 1.34.
  6. Moisture Regain (MR %): Standard moisture regain is 11% but can absorb up to 35%.
  7. Effect of Heat: Silk will withstand at higher temperatures than wool. It will remain unaffected for prolonged periods at 1400C. Silk decomposes at 1750C.
  8. Effect of Sun Light: Sun light tends to encourage the decomposition of silk by atmospheric oxygen.
  9. Luster: Bright.

Chemical Properties of Silk: Chemical properties of the silk fiber are given below:

  1. Effect of Acids: The Fibroin of silk can be decomposed by strong acids into its constitute amino acids. In moderate concentration, acids cause a contraction in silk. Dilute acids do not attack silk under mild conditions.
  2. Effects of Alkalis: Silk is less readily damaged by alkalis than wool. Weak alkalis such as soap, borax and ammonia cause little appreciable damage. Silk dissolves in solutions of concentrated caustic alkalis.
  3. Effect of Organic Solvent: Silk is insoluble in the dry-cleaning solvents in common use.
  4. Effects of Insects: Insect does not affect silk.
  5. Effect of Mildew: Silk is affected by mildew slightly.

I think above physical and chemical properties will help us to be careful about the processing of silk in the different stages of processing from spinning to garments making. Day by day the use of silk products is increasing rapidly.

10 thoughts on “Silk Fiber || Physical And Chemical Properties Of Silk

  1. “Tensile Strength: Cotton is a strong fiber. It has a tenacity of 3.5 – 5 gm/den. The strength is greatly affected by moisture; the wet strength of silk …”

    This doesn’t make any sense, if it’s wet strenght is 85% of its dry strenght then it means it would be weaker wet than dry (which is true) but the sentence says otherwise. also what does cotton has to do anything with this.

  2. i did NOT get any help from this website and to anyone who dose not agree with me you are so stupid you need to put real help up for people instead of putting this crap up i am going to complain and try and get this website put down because you are giving no help to children and adult my child asked me what this means and even i did not know so if you do not wont me to get this website put down i suggest you start to put things on here that makes young people want to do homework or i will complain

Leave a Reply to Ron Toney Cancel reply

Your email address will not be published. Required fields are marked *