Shuttle looms are conventional loom types. There are three types of shuttle loom. In jute mills, semi automatic and automatic shuttle looms are used for jute fabric production. All of the shuttle loom’s weaving principle are same only the process of shuttle changing is differ from one to other. In a semi automatic shuttle loom, the loom is run by power and the shuttle runs through the shed until the weft yarns are finished in the shuttle. In an automatic shuttle loom, the shuttle picks the weft cop automatic from the cop box.
Shuttle Looms For Jute Fabric Production In Jute Mills: In the jute mills, most of the operation is done by the conventional methods. But day by day, the techniques are changing for production. In jute mills, jute yarn is the main element for jute fabric production. Before entering the fabric production, the warp threads are worn in the weavers beam. The weavers beam facilities the weaving process. In the jute mills, two types of loom is used one is ordinary shuttle which is used in semi automatic loom. On the other hand, automatic shuttle is used for automatic shuttle. The size for two types of looms is different.
It is very important to know that the production rate of automatic shuttle is higher than semi automatic shuttle loom. The fabric quality of fabric depends on the weaver’s work efficiency. The weavers should have enough knowledge about the operating system.
Jute is a natural fiber. The manufacturers of jute goods are like to set up their industry within a low cost. Although, the price of jute goods are likely lower than the cotton fiber.
So, choose the best brands of shuttle loom (semi-automatic, automatic) for set up a new industry.