Process Flow Chart Of Viscose Fabric Dyeing

Viscose Fabric

In dyeing floors, different types of natural, regenerated, synthetic, and blended fabrics are dyed. All of the fibers dyeing procedures are not the same. For this reason, a textile engineer should have vast knowledge about the different fibers dyeing process.

Viscose Fabric Dyeing
Process Flow Chart Of Viscose Fabric Dyeing

Process Flow Chart Of Viscose Fabric Dyeing

The following is the flow chart of the viscose fabric dyeing process. They are-

Viscose fabric received from the batching section

The required amount of water was taken into the machine

The fabric was loaded and run for 5-10 minutes at normal temperature

Drain

The required amount of water-filled

CK-1, Oxalic acid was added/dosed at hot water for 15 min at 950 C in adding tank

Rinsing for 20 min.

PH check at 5.5

Leveling agent dosing 10 min. at 550C

Run for 20 min

Salt was added for 10 min

Run for 10 min

The color was dosing for 30 min at 500C

Run for 20 min

Soda was added for 40 min at 500C

Run for 10 min

Temperature increase at 600C

Run for 1 hrs

Shade check (OK)

Rinsing for 30 min.

Adding acetic acid for neutralization for 10 min

Run for 15 min. at 40 0C

Shade check (ok)

Rinsing for 10 mins

Drain

Filling water at the required amount

Hot wash at 950C for 10 min.

Drain

Filling water at the required amount

Cold wash for 20 min.

Drain

Acetic acid added for PH controlled

PH check at 5.5

Softener added at 500C

Run for 30 min

Unloading the dyed fabric

Dyeing performance depends on the proper procedure and qualified dyes and chemicals.

1 thought on “Process Flow Chart Of Viscose Fabric Dyeing”

Leave a Reply to ariful islam Cancel reply

*